background image

3.3 Clutter

45

Select 

Scroll Speed

 and make a selection:

• 

Manual

 allows you to adjust the scroll speed manually using the main knob or the 

control pad.

TIP:

 Adjust to a slower speed to avoid gaps appearing in the seafloor.

Menu

Sonar Setup

Scroll Speed

Sonar Setup

Scroll Speed

Clutter
Alarms

Frequency

Slow

2

3

4

5

6

7

8

9

Fast

5

Default

Auto

Manual

Range
Zoom
Shift

Bottom Search Limit
Transmit

Navigation Info
Appearance

Settings

System
Preferences
Communications
My Vessel

Gain

• 

Auto

 selects a scroll speed to match the boat speed, so targets in the water are drawn 

with the correct aspect ratio and appears less distorted. 

Auto

 is recommended for 

ClearVü

 and 

SideVü

 modes.

• 

Default

 sets the speed to the default scroll speed.

3.2.8  Adjusting Bottom Search Limit

You can set a maximum depth at which the auto range feature searches for the bottom. A 

lower limit acquires data about the bottom faster than a higher limit.
Select 

Bottom Search Limit

 and select either 

Auto

 or a limit ranging from 300 to 3000 ft.

3.3  Clutter

Press 

[MENU]

 > 

Clutter

 in sonar modes to improve the sonar view by reducing noise and 

interference, or adjusting the color and gain.

NOTE:

 The menu is specific to 

Traditional

Split Frequency

ClearVü

, and 

SideVü

 modes.

f

t

G

Menu

Clutter

Clutter

Sonar Setup

Alarms

Color Filter

>

Color Limit

Medium

Low

Off

Off

Smoothing
Surface Noise
Echo Stretch
TVG

Navigation Info
Appearance

Settings

System
Preferences
Communications
My Vessel

Interference

Summary of Contents for CS 1522











































































Reviews:

Related manuals for CS 1522