Garmin CAMPER 780, Owner'S Manual

Page: 14 / 30

By default, the device optimizes your route to avoid traffic delays
automatically. If you have disabled this option in the traffic
settings ( Traffic Settings , page 18 ), you can view and avoid
traffic delays manually.
1
While navigating a route, select > Traffic .
2
Select Alternate Route , if available.
3 Select Go! .
Avoiding Toll Roads
Your device can avoid routing you through areas that require
tolls, such as toll roads, toll bridges, or congestion areas. The
device may still include a toll area in your route if no other
reasonable routes are available.
1 Select Settings > Navigation .
2
Select an option:
NOTE: The menu changes based on your area and the map
data on your device.
• Select
Toll Roads .
• Select Tolls and Fees > Toll Roads .
3
Select an option:
• To be asked each time before routing through a toll area,
select Always Ask .
• To always avoid tolls, select Avoid .
• To always allow tolls, select Allow .
4
Select Save .
Avoiding Toll Stickers
If the map data on your device contains detailed toll sticker
information, you can avoid or allow roads that require toll
stickers for each country.
NOTE: This feature is not available in all areas.
1
Select Settings > Navigation > Tolls and Fees > Toll
Stickers .
2
Select a country.
3
Select an option:
• To be asked each time before routing through an area that
requires toll stickers, select Always Ask .
• To always avoid roads that require toll stickers, select
Avoid .
• To always allow roads that require toll stickers, select
Allow .
4
Select Save .
Avoiding Road Features
1 Select Settings > Navigation > Avoidances .
2
Select the road features to avoid on your routes, and select
OK .
Avoiding Environmental Zones
Your device can avoid areas with environmental or emissions
restrictions that may apply to your vehicle. This option applies to
the vehicle type in the active vehicle profile.
1
Select Settings > Navigation > Environmental Zones .
2
Select an option:
• To be asked each time before routing through an
environmental zone, select Always Ask .
• To always avoid environmental zones, select Avoid .
• To always allow environmental zones, select Allow .
3
Select Save .
Custom Avoidances
Custom avoidances allow you select specific areas or sections
of road to avoid. When the device calculates a route, it avoids
these areas and roads unless no other reasonable route is
available.
Avoiding a Road
1
Select Settings > Navigation > Custom Avoidances .
2
If necessary, select Add Avoidance .
3
Select Add Avoid Road .
4
Select the starting point of the section of road to avoid, and
select Next .
5 Select the ending point of the road section, and select Next .
6
Select Done .
Avoiding an Area
1
Select Settings > Navigation > Custom Avoidances .
2 If necessary, select Add Avoidance .
3 Select Add Avoid Area .
4
Select the upper-left corner of the area to avoid, and select
Next .
5
Select the lower-right corner of the area to avoid, and select
Next .
The selected area is shaded on the map.
6
Select Done .
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1
Select Settings > Navigation > Custom Avoidances .
2 Select an avoidance.
3 Select > Disable .
Deleting Custom Avoidances
1
Select Settings > Navigation > Custom Avoidances .
2
Select an option:
• To delete all custom avoidances, select .
• To delete one custom avoidance, select the avoidance,
and select > Delete .
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
1
Select Settings > Navigation .
2
Select Calculation Mode > Off Road > Save .
The next route will be calculated as a straight line to the
location.
Using the Map
You can use the map to navigate a route ( Your Route on the
Map , page 8 ) or to view a map of your surroundings when no
route is active.
1 Select View Map .
2 Touch anywhere on the map.
3
Select an option:
• Drag the map to pan left, right, up, or down.
• To zoom in or out, select or .
• To switch between North Up and 3-D views, select .
• To filter the displayed points of interest by category, select
.
• To start a route, select a location on the map, and select
Go! ( Starting a Route by Using the Map , page 8 ).
10 Using the Map