Garmin CAMPER 780, Owner'S Manual

Page: 22 / 30

You can view your previous routes and places you have stopped
on the map.
Select Apps > Where I've Been .
Settings
Map and Vehicle Settings
Select Settings > Map & Vehicle .
Vehicle : Sets the vehicle icon that represents your position on
the map.
Driving Map View : Sets the perspective on the map.
Map Detail : Sets the level of detail on the map. More detail may
cause the map to draw slower.
Map Theme : Changes the color of the map data.
Map Layers : Sets the data that appears on the map page
( Customizing the Map Layers , page 12 ).
Auto Zoom : Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
myMaps : Sets which installed maps the device uses.
Enabling Maps
You can enable map products installed on your device.
TIP: To purchase additional map products, go to
http://buy.garmin.com .
1
Select Settings > Map & Vehicle > myMaps .
2
Select a map.
Navigation Settings
Select Settings > Navigation .
Route Preview : Shows a preview of the major roads in your
route when you start navigation.
Calculation Mode : Sets the route calculation method.
Avoidances : Sets road features to avoid on a route.
Custom Avoidances : Allows you to avoid specific roads or
areas.
Toll Roads : Sets preferences for avoiding toll roads.
Tolls and Fees : Sets preferences for avoiding toll roads and toll
stickers.
NOTE: This feature is not available in all areas.
Environmental Zones : Sets the avoidance preferences for
areas with environmental or emissions restrictions that may
apply to your vehicle.
Restricted Mode : Disables all functions that require significant
operator attention.
GPS Simulator : Stops the device from receiving a GPS signal,
and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode .
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Faster Time : Calculates routes that are faster to drive but can
be longer in distance.
Shorter Distance : Calculates routes that are shorter in distance
but can take more time to drive.
Off Road : Calculates a direct line from your location to your
destination.
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use
the GPS simulator to plan routes from a simulated location.
1
Select Settings > Navigation > GPS Simulator .
2
From the main menu, select View Map .
3
Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4
Select the location description.
5
Select Set Location .
Wireless Network Settings
The wireless network settings allow you to manage Wi
‑
Fi
®
networks, paired Bluetooth devices, and Bluetooth features.
Select
Settings > Wireless Networks .
Bluetooth : Enables Bluetooth wireless technology.
Paired Device Name : The names of paired Bluetooth devices
appear in the menu. You can select a device name to change
Bluetooth feature settings for that device.
Search for Devices : Searches for nearby Bluetooth devices.
Friendly Name : Allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Wi-Fi : Enables the Wi
‑
Fi radio.
Saved Networks : Allows you to edit or remove saved networks.
Search for Networks : Searches for nearby Wi
‑
Fi networks
( Connecting to a Wi
‑
Fi Network , page 19 ).
Driver Assistance Settings
Select Settings > Driver Assistance .
Driver Alerts : Allows you to enable or disable alerts for
upcoming zones or road conditions ( Driver Awareness
Features and Alerts , page 3 ).
Speeding Alert : Alerts you when you are exceeding the speed
limit.
Break Planning : Reminds you to take a break and shows
upcoming services after you drive for an extended time. You
can enable or disable break reminders and upcoming service
suggestions.
Proximity Alerts : Alerts you when you approach speed
cameras or red light cameras.
Proximity Alerts Settings
NOTE: You must have custom points of interest (POIs) loaded
for proximity points alerts to display.
NOTE: This feature is not available in all areas.
Select Settings > Driver Assistance > Proximity Alerts .
Audio : Sets the style of alert that plays when you approach
proximity points.
Alerts : Sets the type of proximity points for which alerts are
played.
Display Settings
Select Settings > Display .
Color Mode : Allows you to select day or night color mode. If you
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
Brightness : Allows you to adjust the display brightness.
Display Timeout : Allows you to set the amount of idle time
before your device enters sleep mode while using battery
power.
Screenshot : Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Traffic Settings
From the main menu, select Settings > Traffic .
18 Settings