Garmin G5 User's Manual
190-02072-00 Rev. B
20
Installation Manual
Installation Manual
Pilot's Guide
Index
1.3.6.3 UNIT INSTALLATION
The G5 is installed by inserting the alignment pin located at the top of the unit into
the mating hole in the mounting ring, pushing the unit flush with the instrument panel,
and fastening the captive 3/32” hex socket head screw to the mounting ring as shown
in Figure 1-7. To fasten the captive screw to the mounting ring, insert a 3/32” hex
drive tool through the access hole in the front cover of the G5 as shown in Figure 1-8.
Torque the captive mounting screw to 10-12 in-lbs.
ALIGNMENT PIN
CAPTIVE 3/32 HEX
SOCKET HEAD SCREW
Figure 1-7 G5 Alignment Pin
