Garmin G5 Electronic Flight Instrument Part 23 AML STC Maintenance Manual
190-01112-11
Rev. 1
Page 10 of 18
6
EQUIPMENT REMOVAL & INSTALLATION
This section describes how to remove and install the equipment associated with this STC.
6.1 G5
Unit
CAUTION:
When removing and/or installing the G5, always ensure that aircraft power is off.
Unplug any auxiliary power supplies.
Removal
1.
Insert a hex drive tool through the access hole in the front cover of the G5 as shown in Figure 6-1
loosen the unit from the mounting ring.
Figure 6-1 G5 Hex Driver
2.
Disconnect the pitot and static lines from the G5 unit.
3.
Disconnect the electrical connector and GPS coaxial cable connector (if installed) from the G5
unit.
4.
Remove the G5 unit.
Reinstallation
1.
Inspect the electrical and coaxial connectors and pins for signs of damage. Repair any damage.
2.
Reconnect the electrical connector and GPS coaxial connector (if installed) to the G5 unit.
Summary of Contents for Approach G5 - GPS-Enabled Golf Handheld
Page 11: ......
