Garmin APOLLO GX60, User Manual

Page: 242 / 336

3. Load the NDB approach to BOI. In flight plan
mode active plan or Nav mode home page, press
SEL
. The display will flash “Load Approach?” Press
ENTER
. Select “NDB 10R:PARMO” with the
SMALL
knob and press
ENTER
.
30 nm from Boise (BOI)
1. At 30 nm from your destination, the MSG
annunciator will light. Press
MSG
. At the “Enable
Approach” prompt, press
ENTER
.
2. Select the barometric pressure for the local
altimeter setting with the
SMALL
knob and press
ENTER
.
Point A (Between PARMO
IAF
and BO
FAF
)
1. The Approach Active annunciator will flash at 3
nm inbound. The CDI sensitivity begins to scale at
2 nm inbound.
2. Verify that the Approach Active annunciator lights
at BO. Verify that the OBS/HLD annunciator is
lighted at BO.
Point B (Nearing MAP)
Fly the final approach and descend to MDA.
Point C (Missed Approach)
1. When the decision has been made to execute the
published missed approach, press
OBS/HLD
. The
active waypoint will become BO (Missed Approach
Hold Point). The CDI will gradually scale out to
1.0 nm full-scale deflection. The OBS/HLD
annunciator, after turning off briefly, will turn back
on as BO (now the Missed Approach Hold Point),
is an automatic holding waypoint.
9-52
Approach Examples
SEL
ENTER
ENTER
ENTER
MSG
ENTER
OBS/HLD
WPT SEQ
BOI APPR
PARMO iaf
nBO faf
RW10R map
nBO mahp
Scale 47nm
h
i
NDB 10R
PARMO (IAF)
nBO (FAF & MAHP)
m
f
RW10R (MAP)