Garmin Apollo GX50, User Manual

Page: 76 / 336

Approach GPSS Operation
When the autopilot is directed by GPSS, there are few
considerations when flying an approach.
·
GPSS information will not be provided after you
pass the MAP. You need to follow the directions
published on the approach plate.
·
When directed to the MAHP, use the Direct-To
function. GPSS information will now once again
be provided to the autopilot.
·
Certain waypoints within an approach may be
coded as “Fly-over” waypoints. Fly-over
waypoints must be overflown before starting your
turn to the next waypoint. A turn anticipation
curve will not be drawn for these Fly-over
waypoints. The GPSS information from your
Apollo GX will handle this automatically.
GPSS Rules
There a few rules for providing valid GPSS
information to your autopilot. Your autopilot should
indicate when GPSS information is valid/invalid.
Refer to your autopilot operating instructions for
details.
Apollo GX Information
·
Your ground speed must be more than 5 kts
·
You are navigating to a waypoint (flight plan or
direct-to)
·
You are on the TO side of the waypoint
·
You are not executing Missed Approach
procedures
Autopilot Information
·
Horizontal bank output from the Apollo GX to
the autopilot is limited to 30° or less
·
Turn rate is 3°/sec at speeds less than 250 kts
Turn rate is 1.5°/sec at speeds greater than 250 kts
3-38
Navigation Basics