background image

© Copyright 2007

Garmin Ltd. or its subsidiaries

All Rights Reserved

Except as expressly provided herein, no part of this manual may be reproduced, copied, 
transmitted, disseminated, downloaded or stored in any storage medium, for any purpose 
without the express prior written consent of Garmin.  Garmin hereby grants permission to 
download a single copy of this manual and of any revision to this manual onto a hard drive or 
other electronic storage medium to be viewed and to print one copy of this manual or of any 
revision hereto, provided that such electronic or printed copy of this manual or revision must 
contain the complete text of this copyright notice and provided further that any unauthorized 
commercial distribution of this manual or any revision hereto is strictly prohibited.

This manual is written for software version 5.00 or later, and is not suitable for earlier software 
versions.  Some differences in operation may be observed when comparing the information in 
this manual to later software versions.

Software License Agreement

BY USING THE GTX 328, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS 
OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT.  PLEASE READ THIS 
AGREEMENT CAREFULLY.

Garmin grants you a limited license to use the software embedded in this device (the 
“Software”) in binary executable form in the normal operation of the product.  Title, ownership 
rights and intellectual property rights in and to the Software remain in Garmin.

You acknowledge that the Software is the property of Garmin and is protected under the 
United States of America copyright laws and international copyright treaties.  You further 
acknowledge that the structure, organization and code of the Software are valuable trade 
secrets of Garmin and that the Software in source code form remains a valuable trade secret of 
Garmin.  You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer 
or reduce to human readable form the Software or any part thereof or create any derivative 
works based on the Software.  You agree not to export or re-export the Software to any country 
in violation of the export control laws of the United States of America.

 

CAUTION: 

The GTX 328 should be turned off before starting or shutting 

down aircraft engine(s).

   

NOTE: 

Contact a Garmin dealer for software updates.

January 2007 

Part Number 190-00420-03 Rev. A 

Printed in USA

Summary of Contents for 328











Reviews: