![background image](http://html1.mh-extra.com/html/garland/xtrim-keeper40v-355-r/xtrim-keeper40v-355-r_instruction-manual_3635649033.webp)
English
English
33/104
6.3.3. TELESCOPIC REGULATION AND 90º TURN
1. Loosen the collar by turning in the direction marked
by the unlocking arrow.
2. Enlarge or shorten the pole to the desired length.
3. Tighten the collar by turning in the direction
marked by the lock arrow.
4. Pull the tab up without releasing it, turn the pole
90º to the left or right.
5. Release the tab
Be sure you have tightened the collar tightly before
starting the machine.
6.3.5. CONTROL OF THE WORKING ANGLE
Press the button and adjust to the
desired angle.
6.3.6. TURNING ON AND OFF
Turning on the machine:
Install the battery
Press the on / off button, (if everything is correct, the
green light will remain steady, if there is any problem
the green light will flash) then press the security
button and, without releasing it, press the accelerator
trigger.
Disconnection of the machine:
Release the accelerator trigger, press the on / off
button, if you are not going to use it for a long time
remove the battery.
After turning off the machine, the cutting tool
will continue rotating for a moment due to inertia.
Wait until the cutting tool stops before carrying out
maintenance on the machine or transporting it.
Direction of rotation
to unlock
Direction of rotation
to block
Sense for
unlock
On/off button
Accelerator trigger
Security button
Summary of Contents for XTRIM KEEPER40V 355 R
Page 102: ...Espa ol Portugu s 102 104 NOTAS...
Page 104: ......