Garland XTRIM KEEPER 20V 255, Instruction Manual, Page: 33 / 104

English English
33/104
Tighten, repair or replace everything necessary before
using the machine.
6.3.2. TELESCOPIC REGULATION
Direction of rotation
to unlock
Direction of rotation
to lock
Sense to
unlock
1. Loosen the collar by turning in the direction
indicated by the unlock arrow.
2. Lengthen or shorten the pole to the desired length.
3. Tighten the collar by turning in the direction
indicated by the locking arrow.
Make sure you have tightened the collar tightly before
starting the machine.
6.3.3. WORKING ANGLE REGULATION
Press the head rotation button
and adjust the desired angle.
6.3.4. ENCENDER Y APAGAR
Accelerator trigger
Safety button
Turning on the machine:
Install the battery
Then press the safety button and, without releasing it,
press the accelerator trigger.
Disconnection of the machine:
Release the throttle trigger, press the on/off button, if
you are not going to use it for a long time, remove the
battery.
After turning off the machine, the cutting tool will
continue to rotate for a few moments due to inertia.
Wait until the cutting tool stops before performing
maintenance on the machine or transporting it.