Garland XTRIM KEEPER 20V 255, Instruction Manual, Page: 31 / 104

English English
31/104
6.1. MATERIAL’S LIST
This machine includes the following items that you
will find inside the box:
• Machine.
• Protector.
• Protector screw (x1).
• Profile wheel support.
• Profile wheel support screw (x2).
• Front handle
• Manual.
Carefully remove all items from the box and ensure
that all listed items are present.
Inspect the product carefully to ensure that there are
no damaged items. If you find any damaged part or
missing element, do not use the machine until the
defect has been repaired or you have all the parts
that make up the machine. Using the machine with
defective parts or without all its elements may cause
severe personal injury.
6.2. MOUNTING
6.2.1. GUARD ASSEMBLY
Place the protector as shown in the figure. Insert the
screw circled and then tighten.
6.2.2. ASSEMBLY OF THE PROFILE WHEEL BRACKET
Place the support as shown in the figure. Insert the
screws circled and then tighten.
6.2.3. DELTA HANDLEBAR ASSEMBLY
Place the handlebar as shown in the figure, choose
the position that best suits your way of working. Insert
the pin as shown and on the other side screw the nut
until it is tight.
6. START UP INSTRUCTIONS