![background image](http://html.mh-extra.com/html/garland/xtrim-first-pg/xtrim-first-pg_instruction-manual_564726030.webp)
English
30/124
English
31/124
6.1. LIST OF MATERIALS
This machine includes the following elements that you
will find inside the box:
• Engine.
• Transmission.
• Protector.
• Handle.
• Harness.
• Tooling.
• Instruction manual.
Ensure that all elements listed above are included
with the machine. Thanks to the quality control checks
at the factory it is highly unlikely that any elements
will be missing. If you were to find any element
missing, do not use the machine until the defect has
been repaired or the machine is complete.
Using the machine with defective parts or without
all the elements can cause severe personal
damages.
6.2. MOUNTING THE MACHINE
6.2.1. INSTALLATION OF THE HANDLEBAR
Install the handle on the top transmission bar as
shown in the figure placing it at a distance from the
accelerator that is comfortable for you as end user.
Tighten the screw to avoid that the handle moves.
6.2.2 GUARD SUPPORT ASSEMBLY
Place the guard support as shown in the figure. Place
the screw, tighten the nut and tighten.
6.2.3. INSTALLATION OF THE TRANSMISSION
6.2.4 MOUNTING THE NYLON BUMP HEAD
To mount the bump head place part B into the axis
C and thread nut A clockwise. To avoid that the axis
rotates, hold part B with one hand whilst you press A
with the other hand .
6. START UP INSTRUCTIONS
Summary of Contents for XTRIM FIRST PG
Page 122: ...ελληνικά 122 124 ελληνικά NOTAS ...
Page 124: ......