Garland XE24, Installation, Operating & Service Instructions

Page: 19 / 32

Part # 4517125 (09/03) Page 19
PROGRAMMING continued
5. Use and to choose the desired Menu Item.
6. Press
four, (4) times to display “(MENU
ITEM) GRILL TEMP XXX” displayed in °F or
°C.
7. Use and
to change the set temperature to
the desired value.
8. Press to save the changes.
9. Press to return to “PROGRAMMING MODE
MENU ITEMS”
10. Press again to exit.
To Change a Product Name:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press
to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press
. “MENU ITEMS STANDBY” will be
displayed.
5. Use and to choose the desired Menu Item.
6. Press
five, (5) times to display “PRODUCT
NAME (CHOSEN ITEM)”
7. Use and
to cycle through the available
product names until the desired name is achieved.
8. Press to save the changes. You will automatically
return to “PROGRAMMING MODE MENU
ITEMS”.
9. Press to exit.
System Info...
To View Recovery Time - Upper Platen:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press
to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press one, (1) time to display “PROGRAMMING
MODE SYSTEM INFO.”
5. Press
to view the upper recovery time.
“RECOVERY UPPER XXXX” will be displayed.
6. Press to return to “PROGRAMMING MODE
SYSTEM INFO”.
7. Press to exit.
To View Recovery Time - Grill:
1. Press and hold for three, (3) seconds. “ENTER
CODE” will be displayed.
2. Using the Gap Setting buttons,
enter the code, (1251). “ENTER CODE **** ” will
be displayed.
3. Press
to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS”
will be displayed.
4. Press one, (1) time to display “PROGRAMMING
MODE SYSTEM INFO.”
5. Press
two, (2), times to view the grill recovery
time. “RECOVERY GRILL XXXX” will be
displayed.
6. Press to return to “PROGRAMMING MODE
SYSTEM INFO”.
7. Press to exit.