Garland ULTIMATE 820 QG-V23, Instruction Manual

Page: 33 / 160

English English
33/160
substituting this water with cold water. Nevertheless,
do not have the machine working for more than a
minute without pressing the trigger
.
Do not use this machine when temperature is below
0º C.
Use this machine and its accessories as per the
instructions in the manual. The use of this machine
for jobs different to those stipulated in the manual will
cause dangerous situations.
Check that all security elements are installed and in
good working condition.
Remember that it is the end user operating the
machine who is responsible for any danger or
damages caused to other people or things. The
manufacturer will not in any case be held liable for
damages caused by an incorrect use of this machine.
Do not overstretch the machine. Use the machine for
its recommended use. The use of the machine for its
correct job will guarantee a better job as well as a
safe use.
Do not use this machine if the switch does not change
between “open” and “closed”. Any machine that
cannot be controlled with the switch is dangerous and
must be repaired.
Keep the machine with a good maintenance. Ensure
all moving parts are aligned and that no other parts
are damaged or broken. If the machine is damaged,
repair before use. Many breakages occur because
machines are poorly maintained
Maintain the handles of this machine clean and dry.
Handles that are dirty or greasy become slippery and
cause loss of control over the machine.
Switch off the machine, unplug the spark plug and
make sure the cutting tool is stopped before carrying
out any adjustments to any part of the machine,
refuelling, cleaning , transport or storage the machine.
Such security measures reduce the risk of accidental
start up.
If the machine starts vibrating in a strange way, stop
it and examine it to find out the cause. If the motive
is not clear, take the machine to your nearest service
agent. Vibrations are always an indicator that the
machine has a problem.
Stop the engine whenever you leave the machine.
Reduce the throttle setting during engine shut down
and, if the engine is provided with a shut-off fuel
valve, turn the fuel off when engine is stopped.
2.6. SERVICE
Periodically take your machine for revision by a
qualified after sales service and use only original
spare parts. This will guarantee that the machine is
always in good working condition.
2.7. RESIDUAL RISK FACTORS
Even when using the tool in the prescribed manner
it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with
the construction and the design of the tool:
* Possible injuries to skin and other parts of the body
if the water jet is projected towards people.
* Skin burns if you touch the hot parts of the
machine.
* Lung and skin injuries if pulverising other liquids
that are not clean water
* Danger risk if the lance or pressure hose are not
correctly installed.