background image

12

For the oven to operate at peak efficiency, the cavity, door and air filters must be kept clean.

A daily cleaning routine will ensure that you comply with the required hygiene standards and will
help to maintain and prolong the efficiency of your oven.
Follow the SAFETY INSTRUCTIONS at the beginning of this manual.

ALWAYS switch off at the electrical supply and allow oven
to cool for at least 20 minutes before cleaning

As required wipe out spillages with disposable paper wipes

NEVER use steel wool, knives or harsh abrasives on any
part of the oven

As with all electrical appliances, it is wise to have the
electrical connections inspected periodically.

Faults arising from neglect or
misuse including use without clean
filters in place are not covered by
the guarantee.  Service visits as a
result of such faults will be
chargeable.

1.

Remove the air filters from each side of the oven  by

sliding the filter out from the front.

2.

Wash in clean, warm soapy water, rinse and pat dry.
Slide back into position through slots.

Cleaning the oven cavity and door

1

Remove food particles from the gap between the rear baffle
plate and the floor of the oven with a clean, dry brush.
( Location A )

Remove food particles from between the inside edge of the
door and the front of the oven floor using a clean, dry brush.
( Location B )

2.

Apply non-caustic oven cleaner to interior surfaces

except door seals. Leave for the recommended

time. Wash off using a clean cloth and plenty of

clean, warm water. Dry using a fresh, clean cloth.

(Note: the small perforated cylinder is the tempera-

ture sensor)

3.

Wipe hinges with a clean, damp cloth.

DO NOT apply lubricating oil.

4.

Wipe door seals carefully with a clean damp cloth.
Examine for signs of wear or damage.

Cleaning the control panel and exterior surfaces

1.

Switch on oven with microwave power only (without heat).

2.

Place a container of water ( 2.5 pints, 1.5 litres) into the

centre of the oven cavity.

3.

Set microwave power to 100%.

4.

Set timer to 30 minutes and press start button.
At end of steam cycle, wipe out cavity with a clean cloth.

DO NOT USE THE OVEN WITHOUT
CLEAN AIR FILTERS IN POSITION

Hints and Tips for stubborn stains in the oven cavity

Wipe down regularly with a damp cloth.

If the door seals are damaged ,the oven
must be repaired by an approved Servicer.

A

B

Door
seal

Baffle
plate

CLEANING

Summary of Contents for Tim Horton's














Reviews: