10
OPERATING INSTRUCTIONS:
The ‘H’ in the display will flash to show
the oven is warming up.
When the H stops flashing the oven is
ready to cook.
Note:
The oven cavity may take up to 15 minutes to
reach cooking temperature from a cold start.
1
2
WARNING:
DO NOT APPLY MICROWAVE ENERGY WHEN OVEN IS EMPTY
DO NOT USE THE OVEN WITHOUT
CLEAN AIR FILTERS IN POSITION
To familiarize yourself with the controls place a bowl
containing approximately 2.5 pints of water in the oven.
3
Taking all the necessary precautions to ensure you do not burn yourself,
place the food into the cavity and close the door.
Always keep the period that the door is open to a minimum.
The display confirms the program
number selected.
SELECT THE ICON PROGRAM NUMBER PAD
TO STOP THE COOK
PROGRAM
The program may be
stopped at any time
by pressing the
CANCEL PAD
WARNING:
The oven stays HOT when the door is opened or when the cooking
program is cancelled. The oven will remain at cooking temperature and
the food inside the oven will continue to cook
Press the Preheat Pad to heat the
oven to cooking temperature.
PRE-HEAT
PLACE FOOD IN THE HOT OVEN
PAUSE
A cook program may be
interrupted by opening the oven
door.
On opening the door the timer
will be held at this point and the
display will flash to indicate an
interrupted cycle.
TO CONTINUE the cycle close
the door, an audible warning
sounds as a reminder to press
any icon pad to restart the timer.
E1 ERROR DISPLAY
If the door is open for more than
15 seconds the display will
show an E1 error. Close the
door and continue as above.
Note:The oven will stay HOT
example: Icon Program 4
The timer then counts down the
cooking time.
When the remaining time reaches
zero the Program number flashes
and an audible signal will be given.
Remove the food from the cavity.
The first cook program stage lights.
4
TO START COOKING SELECT
THE HALF OR FULL BATCH PAD
SWITCH THE OVEN ON
The display shows the Key code for
the MenuKey
™
( See Page 10 ).
5
example: Key Code 1
6
To continue cooking other food
products repeat steps 3-5.
PREHEAT
The PREHEAT pad switches the
convection heaters on and heats
the oven to cook temperature.
Pressing PREHEAT again
switches the heaters off.
