USER GUIDE
EdgeSafe | P10GxxBPE
Mode
- use the mode pull down panel select Span (Packet Inject)
Set
- select to set the unit in the span (packet inject) mode
1
- Network Port
2
- Span (Packet Inject) Port
3
- Span (Packet Inject) Port
4
- Span (Packet Inject) Port
In this mode ingress traffic into network port 1 is sent to span ports 2, 3 and 4. Ingress traffic from packet inject
ports 2, 3 and 4 are sent to network port 1. In a loss of power condition, traffic from network port 1 is sent to span
port 2, but not span ports 3 and 4. Traffic from packet inject port 2 is sent to network port 1, but not from packet
inject ports 3 or 4.
Breakout Mode -
Garland Technology | 716.242.8500 |
Copyright © 2020 Garland Technology, LLC. All rights reserved.
18
