![background image](http://html2.mh-extra.com/html/garland/p10gmsbpe/p10gmsbpe_user-manual_3648403044.webp)
User Guide
EdgeSafe Bypass TAP | P10GxxBPE | 4.22.1
5. Select Save to save updates.
Enable/Disable Config Map
Config maps may be enabled or disabled as desired. If a config map is enabled, it is in the database and
available for traffic. If a config map is disabled, it is in the database and not available for traffic. If the
config map has a green check, then it is enabled. If the config map has a red dash, then it is disabled.
Disable Config Map
1. Select the green check for the config map in the Enable column.
The green check will change to a red dash.
2. Select Save.
Enable Config Map
1. Select the red dash for the config map in the Enable column.
The red dash will change to a green check.
2. Select Save.
The red dash will change to a green check.
3. Select Save.
8. Aggregate Mode
In this mode, the network ports 1 and 2 and aggregate ports 3 and 4 are defined by the system. LFP
is supported on the network ports in this mode. The traffic ingressed port 1 is egressed out ports 3 and 4.
The traffic ingressed in port 2 is egressed out ports 3 and 4.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
44