manualshive.com logo in svg

Garland P10GMSBPE, User Manual

Share
Download
Garland P10GMSBPE User Manual Download Page 39

User Guide

EdgeSafe Bypass TAP | P10GxxBPE | 4.22.1

7. Place the cursor in the Description panel and enter the description, optional.

8. Select the Check to apply updates.

 Ingress

1. Add an ingress port(s) 1 and/or 2 by placing the cursor on the desired port. Select with the left mouse

button. Drag the port to the Ingress panel and release. Ports may be added in any combination. If
ports 1 and 2 are added, then the traffic from the ports will be aggregated.

Figure 13 Ingress

2. Remove a port by selecting the Red X.

 Filters

1. Add filters by placing the cursor on the desired filter template. A previously created filter

template or the new filter template option may be selected. Select with the left mouse button. Drag the
filter template to the Filter panel and release. The filter template will become an actual filter once
the config map is saved.

Filters may be added in any combination. If multiple filters are added, then the top filter is the

highest priority. The filters are considered from top to bottom. A filter may be selected
and moved up or down depending on priority preference.

Figure 14 Filter

Figure 15 Filter System Considerations

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

39

Summary of Contents for P10GMSBPE







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands