Garland OnGard OG4000LDCS-WB Page 2 User Manual Download

Page: 2 / 24

Thank You for Purchasing this Garland OnGard Smoke Alarm

These models are powered by a non-replaceable, long life sealed lithium battery system, and include SMART HUSH

Control to temporarily silence nuisance alarms. They are capable of interconnecting wirelessly via RF signals.

READ SECTION 9:

Activation and Wireless Alarm Network, before powering the units. You do NOT need a

home wi-fi system to use these units. Garland alarms connect to each other wirelessly via communication on

the 915-928 MHz band.

Teach children how to respond to the alarm and that they should never play with the unit

Your Garland OnGard Smoke Alarm was designed for use in a residential environment.

NOTE:

Please thoroughly read this user guide and save the document for future reference and to pass on to any

subsequent owner.

Summary of Contents for OnGard OG4000LDCS-WB

























Search results

Summary of Contents for OnGard OG4000LDCS-WB

Reviews:

Related manuals for OnGard OG4000LDCS-WB

Brands by name

Popular brands

Garland OnGard OG4000LDCS-WB, User Manual

Search results

Summary of Contents for OnGard OG4000LDCS-WB

Reviews:

Related manuals for OnGard OG4000LDCS-WB

Brands by name

Popular brands