![background image](http://html1.mh-extra.com/html/garland/mo-du-10000-360/mo-du-10000-360_installation-operation-and-maintenance-manual_564306013.webp)
Installation
RTCSmp
Built-In Module-Line Dual/Quad Cooktops
Part Number 4532415 12/14
Page 13
4
Installation
4.1
Important Safety & Electrical Requirements
This appliance component requires additional features and components to comply with appliance and
electrical standards. It is the responsibility of the customer and installer to interpret and comply with all
applicable safety and electrical standards.
o
This product requires the addition of:
A suitable non-flammable electrical enclosure; a means to conceal and protect
components and wiring.
Grounding and bonding to the enclosure.
Markings to show appliance ratings and end manufacturer information.
Investigation by local electrical authority. Warning and caution labels and other
markings required by electrical and safety standards could be provided by local
authority.
o
Depending on the application and configuration of this product, consider the addition of:
Field supply connection terminals (terminal block).
Branch circuit protection (breakers).
Fans, ventilation or cooling systems and controls.
The installation, including electrical installation, must be carried out by registered installation contractors
only. The contractors are responsible for interpreting all instructions correctly and performing the
installation in compliance with national and local regulations. The warning signs and rating plates on the
cooking equipment must strictly be followed.
Read ALL SECTIONS carefully, comply with all requirements listed and ensure all inspection is done by
qualified personnel.
Refer to the technical data given in chapter
3 Dimensions and Technical Specifications
.
Induction equipment that is not installed correctly will have warranty voided. See
Warranty, p.2
.
4.2
Installation Overview and Installation Clearance
4.2.1
Installation Overview
To protect the induction unit and wiring, we recommend isolating the generator, the coil carrier sheets, and the
wires in separate electrical compartments inside the cabinet (Figure B). The illustration also shows a simplified
representation of an installation.
IMPORTANT
To ensure reliability of the induction unit, the cabinet/compartments must have sufficient
ventilation for the exhaust. Buildup of hot exhaust air will cause the unit to reduce power or to
switch-off. See
3.5 Operating Conditions
.