![background image](http://html1.mh-extra.com/html/garland/mo-du-10000-360/mo-du-10000-360_installation-operation-and-maintenance-manual_564306036.webp)
Installation
RTCSmp
Built-In
Module-Line Dual/Quad Cooktops
36
Part Number 4532415 12/14
To setup the unit for operation:
1.
Ensure the control knobs are at the OFF-Position.
ON-Position
Any position where
“0” is not pointing to
the LED light. The
light is on.
OFF-Position
“0” points to the LED
light. The light is off.
2.
Remove all objects from the glass-tops.
3.
Review the components and cable connections charts in section
4.6 Models, Components and Cable
Connections
.
IMPORTANT:
Always connect the cables according to the labels affixed next to the connectors and on
the cables.
The cables—coils, sensors, CAN/BUS, mains— must be connected correctly.
Ensure the insertion tongues of the RJ-45 cable (CAN/BUS) are fully engaged.
The coil and sensor cables must be routed separately and MUST NOT rest on one
another.
The sensor and RJ45 cables must be routed separately and MUST NOT rest on one
another.
Ensure ALL coil/sensor connectors are connected correctly before turning on the
unit.
4.
Connect the unit to the power supply.
5.
Perform the Function Test. See chapter
5 Function Test
.