![background image](http://html1.mh-extra.com/html/garland/int40g2sr44/int40g2sr44_user-manual_3644109035.webp)
User Guide
EdgeLens | INT40G2XX44 | 4.22.1
filter template to the Port XX Egress Filters panel and release. The filter template will become an
actual egress filter once the config map is saved.
Filters may be added in any combination. If multiple filters are added, then the top filter is the
highest priority. The filters are considered from top to bottom. A filter may be selected
and moved up or down depending on priority preference.
Figure 15 Port XX Egress Filters
Figure 16 Egress Filter System Considerations
3. If new is selected, the Edit Filter panel will displayed.
4. Enter the filter name, optional. If no name is entered the system will automatically apply a name to the
egress filter as follows, eFltPXX, eFltPXX(2), eFltPXX(3) etc.
5. Select Accept.
6. Select Cancel to disregard.
7. Remove a filter template by selecting the Red X.
Config Map Save
1. Select Save to save the current configuration.
The “Save this configuration? (May take a few seconds.)” panel will be displayed.
2. Select OK to save the Config Map.
3. Select Cancel to disregard.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
35