![background image](http://html1.mh-extra.com/html/garland/int40g2sr44/int40g2sr44_user-manual_3644109042.webp)
User Guide
EdgeLens | INT40G2XX44 | 4.22.1
Mode
1. Modify the port mode by selecting the pull down panel for the desired port.
2. Select the desired mode. The available port modes are Normal, Loopback, Listen Only
and Force Link.
3. Select Save to save updates.
Port Statistics
The following statistics may be displayed on the Port Statistics panel.
Port number
Receive Errors
Transmit Errors
Receive Packets
Transmit Packets
Receive Discards
Transmit Discards
1. Select Port Statistics on the Port Configuration panel.
The Port Statistics panel will be displayed.
2. Update the statistics by selecting Refresh.
3. Clear and refresh the statistics by selecting Clear.
VLAN Tag
VLAN tag applies a VLAN ID to the packets when the port is configured as an ingress port on
a config map. This option is only available for packet brokers ports. The packet broker section
consists of ports 5 through 36.
1. Select the VLAN Tag enable option for the desired port.
2. Enter the desired VLAN ID, (1-4094).
3. Select Save.
4. Disable by deselecting the VLAN Tag option for the desired port.
5. Select Save.
VLAN Strip
VLAN strip removes the outer VLAN ID for packets when the port is configured as an egress
port on a config map. This option is only available for packet brokers ports. The packet broker section
consists of ports 5 through 36.
1. Select the VLAN Strip option for the desired port.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.
42