background image

Part Number  4532292   Rev 3   12/15 25

Section 4 

Maintenance

Daily Cleaning and Maintenance

STAINLESS STEEL CASE

1.  For any appliance with stainless steel case or stainless 

steel flange, clean the stainless steel surface using a soft 

cloth with a mild detergent and/or a food-safe liquid 

cleaner designed to clean stainless steel.

2.  Wipe dry with a soft clean cloth.

VISUAL INSPECTION OF SILICONE SEAL

Inspect the silicone seal around the glass perimeter or the 

joint between the appliance and the counter surface. Call for 

service immediately if you notice:
•  Cracks on the silicone seal.
•  The silicone seal comes away from the glass/housing or 

moves when you press down on the seal.

GREASE DRAWER

•  Empty out the grease drawer as often as necessary.

,

 Caution

Risk of burn from hot equipment, hot grease and steam. 

Wear personal protective equipment.

,

 Caution

A grease drawer must be in place before operating 

appliance.

DRAIN PLUG (BRAISING PAN EQUIPMENT)

•  The drain plug is dishwasher-safe.

CLEANING THE GRIDDLE PLATE / BRAISING PAN

,

 Caution

Risk of burn from hot equipment, hot grease and steam. 

Wear personal protective equipment.

Notice

DO NOT USE

 strong detergents and solvents such as 

Ketone, Ester, and alkaline detergents. Depending on 

the concentration, reaction time and temperature, 

these chemicals could damage the special coating on 

the griddle plate.

DO NOT USE

 steel wool, tough scratching sponges, or 

knives on the grill plate. Use the cleaning pad provided 

with the equipment.

DO NOT USE

 ice cubes because that can cause 

deformation of the griddle plate.

To clean the griddle plate / braising pan:

1.  Set temperature to 60

o

C or 140

o

F.

2.  Pour some water onto the plate / pan and let the hot 

water dissolve the soiling.

3.  Use non-abrasive scrubbing pads to scrape the residues 

into the grease drawer. To avoid burn injuries, scrub and 

scrape with a spatula on a non-abrasive scrubbing pad.

Summary of Contents for GI-SH/GR 3500

































Reviews: