Garland BH/BA 1500, Instructions For Use Manual, Page: 18 / 22

-18-
090908_Instructions for use RTCS Base- and Wok-Line_E.doc
8.2 Fault finding without error code
Fault Possible Cause Action to take
No heating
Indicator operation
is OFF (dark)
No mains supply Check the electrical supply (cable
plugged onto the wall socket)
Check preliminary fuses
Control knob is in OFF-
position Turn control knob ON
Cooker is defective Unplug the unit from the electrical
supply and contact your service
partner
No heating
Indicator operation
is flashing
(If an error code is
flashing see section
„Fault finding” with
error code)
Pan is too small (bottom
diameter less than 12 cm,
only BH/IN and SH/IN) Use a suitable pan
Pan is not placed in the
center of the heating area
(the cooker cannot detect the
pan) Move the pan to the center of the
heating area
Unsuitable pan Choose a pan recommended for
induction cooking
1)
Cooker defective Unplug the unit from the electrical
supply and contact your service
partner
Poor heating
Indicator operation
is ON (shining)
Used pan is not appropriate Use a pan recommended for induction
cooking and compare the result with
„your“ pan
Air-cooling system
obstructed Verify that air inlet and air outlet are
not obstructed with objects
Ambient temperature is too
high (the cooling system is
not able to keep the cooker in
normal operating conditions
2)
Verify that no hot air is sucked in by
the fan
Reduce the ambient temperature. The
air inlet temperature must be lower
than 40ºC/110ºF
One phase is missing (only
units with three phase
supply) Check preliminary fuses
Cooker defective Unplug the unit from the electrical
supply and contact your service
partner