English
8/16
English
9/16
3. START UP INSTRUCTIONS
Thank you for purchasing the support arm ARM
450, which will help reduce the effort of keeping a
suspended tool at working height.
The capacity of this arm support ARM 450 is between
3 and 5 kg. This support arm can only be used for
machines that weigh between 4 and 8 kg.
3.1. ASSEMBLY
Improperly using the accessory by using more weight
than recommended may result in dangerous situations
for the user. The manufacturer is not liable for these
situations due to abuse.
1. Place the dock on the top tube. At the factory, the
dock is set to maximum.
2. Attach the upper and lower tubes. Tighten the knob
(A) to fix the tubes into position.
3. By using the knob (B), you can adjust the gap
between the lower and the upper pad to achieve
the most ergonomic position for its back.
Pomo A
Pomo B
Tubo inferior
Tubo superior
Upper tube
Spring
Knob B
Position 1
Position 2
Summary of Contents for ARM 450
Page 7: ...Español 7 16 NOTAS ...
Page 13: ...English 13 16 NOTES ...
Page 14: ...English 14 16 NOTES ...
Page 16: ......