Garland 900 Series, Installation, Operation And Maintenance Instructions

Page: 13 / 19

To avoid electric shock, it is necessary to have earth connection. You can find the
earth connection at the terminal boards, identified with symbol to where earth
wire has to connect.
HANDLING AND INSTALLING
13
Electric Power Connection
1. Before connecting the appliance to the main supply, compare the electrical data in the rating plate
(on the appliance side panel) to the local electric energy supply. Make sure the main voltage correspond
to the voltage indicated on the nameplate of the appliance.
2. Only r egistered installation companies can work on the electric al installation concerned with certain local
and national regulations. The companies are responsible for all i nterpret ation of all regulation s, as well as
perform ing the installation and safety instructions. The warning signs and nameplates must be strictly
co mplied.
3. The appliance is equipped with a power terminal and connected with power cable and power socket.
4. DO NOT p lace the power cable near heat sources or water leakage area .
WARNING!
Incorrect voltage may damage the appliance.
WARNING!
-
E BM 6
(1N AC 230V 50/60Hz 2kW)
-
E BM 8
(3N AC 400V 50/60Hz 4kW)