Garland 900 Series, Installation, Operation And Maintenance Instructions

Page: 11 / 19

HANDLING AND INSTALLING
11
Important! Before installing, place the appliance on solid, flat, stable and horizontal
surface and connection availability.
T he following instructions are intended for authorized and qualified installer. Before doing installation,
adjustment, and maintenance operations, the installer must follow local and legal regulations. Cut the
electrical power before doing any installation.
1. This appliance uses electrical supply . Installation should be done according to:
a. Local and international standards
b. Local recommendation, such as building standards and recommendation concern with combustion
c. Directions and regulations from the gas and power supply companies
d. Regulation concern with prevention accident measures
e. Fire prevention regulations
f. Applicable I.E.C (International Electro technical Commission) regulations
2. Remove all packaging material and protective coatings.
3. Ensure electric power supply is sufficient to operate this appliance.
4. Before testing, put the appliance in a good ventilated room and keep all flammable material away
5. Before cleaning or maintaining the appliance, please cut off electric power and isolate gas supply
(if any) to the safe place .
The packaging carries all information necessary for loading and unloading. When unpacking, check that all
components are present in the correct quantities and undamaged. The packaging material
s must be
properly disposed of in accordance with legal requirements
Packaging and Transport
• Packaging
The packaging is designed to designed to reduce space and accommodate to the type of transport
used. To ease transportation, some components may be removed from the appliance and packed
seperately.
• Transport
Different mode of shipment/transportation(s) may be selected, depending on the
destination. During transport, secure the packaging firmly to prevent undesirable shifting.