Garland 1080 TQG, Instruction Manual

Page: 45 / 148

English English
45/148
If the machine does not start, check the compression of the engine and the spark from the spark plug:
In the case of not being able to solve the problem, take your machine in for a service check. To locate the after-
sales service nearest to your location, please contact the point of sale where you purchased the machine.
The cylinder’s
compression is
normal
The spark plug
is OK
Probable Cause Corrective Action
YES YES
No fuel in the tank Fill fuel tank with fuel
The gasoline filter is dirty Clean the filter
There is water in the fuel Replace fuel
The gasoline used is not the right
kind
Change the fuel with one with
proper octane
The carburetor is dirty
Send your machine to the
service technician
YES No
The switch is “O” Turn the switch to “I”
The spark plug is dirty Clean the spark plug
The spark plug pipe is not connected Connect the spark plug
No compression
YES
The spark plug is loose Tighten the spark plug
The piston and its segments are
worn
Send your machine to the
service technician
The cylinder is scratched
Send your machine to the
service technician
The engine
does not turn
Cold engine
Send your machine to the
service technician