21
d.L.OF
– DMX512 control of lamp off. This function allows you to turn
off the lamp via a DMX512 control signal. If this function is set to
OFF
,
then the lamp off signal from the console has no effect.
To turn the DMX512 lamp off function off:
1. Select the
d.L.OF
option from the
SPEC
function of the display
(see
SPEC
above).
2. Press the
[ENTER]
button.
3. Press the
[UP]
or
[DOWN]
button until the display reads
OFF
.
4. Press the
[ENTER]
button.
5. Press the
[MODE]
button twice to back out of the special
functions mode.
teMP
– Temperature monitor. This function monitors the internal
temperature of the fixture head.
To read the internal temperature:
1. Select the
teMP
option from the
SPEC
function of the display
(see
SPEC
above).
2. Press the
[ENTER]
button. The display will indicate the current
temperature in degrees Celsius.
3. Press the
[MODE]
button twice to back out of the special
functions mode.
Fan.S
– Fans settings. This setting allows you to adjust the fan
speed and or the way the fan functions according to your needs. It may be
advantageous to temporarily lower the fan speed and thus reduce the fan
noise during quiet passages, e.g., between songs. If noise is an issue, the
fans may be set to one of five different settings to help reduce the noise
level.
To adjust the fan speed setting:
1. Select the
Fan.S
option from the
SPEC
function of the display
(see
SPEC
above).
2. Press the
[ENTER]
button.
3. Press the
[UP]
or
[DOWN]
button to select one of five fan speed
settings –
LO.OF
,
Lo.HI
,
AUTO
,
high
, and
reg
. The behavior of
each setting is described below:
Lo.of
– The fan will operate at the very lowest speed until
the lamp heats up above a predetermined temperature level.
Summary of Contents for GKH 575
Page 37: ...37 VIII Photometric Data...
Page 38: ...38...
