GARDY SHELTER 553540, Assembly Instructions Manual, Page: 31 / 151

30 31
GB
CODES PART DESIGNATION DIMENSIONS (MM) QTY
A Front bottom beam 40x95x5480mm 1
B Intermediate beam 40x95x1986mm 23
C Rear beam 40x95x5480mm 18
H Bottom side beam 40x48x3480mm 2
H1 Low side beam 40x48x3480mm 1
Start the construction with the 6 bottom planks: the three bottom front, rear and middle
planks (pieces) the three lower front, rear and middle planks (parts A, B, C) and the first three
side planks (parts H, H1) with the logs’ spigot facing upwards.
Assemble them to form a base frame.
When installing the planks, it is best to use a rubber hammer and, above all, a rubber
hammer and, above all, an assembly wedge. Place the wedge on the tongue of the plank
and tap it with the hammer until the plank is pushed all the way in.