Operation
Operation manual VCpro 600
35
6.3
Configuring the vacuum controller
6.3.1
Access control
The device offers the opportunity to grant access rights using two profiles.
USER password:
protects the vacuum controller's operating area. The password is also
required on restart or to unlock the device.
ADMIN password:
additionally protects the device's system settings and can be used for
unlocking.
If passwords are used on the end device, these passwords are also required for access via
PC.
NOTE
You must set the ADMIN password before you can set the USER password.
Set ADMIN password
1. Select the "System settings" menu option.
2. Select the "Access control" menu option.
3. Select the "Set ADMIN password" menu option.
4. Select 4 numbers between 0-9.
5. Confirm the 4 numbers by entering them again.
6. Confirm you selection with "OK."
Set USER password
1. Select the "System settings" menu option.
2. Select the "Access control" menu option.
3. Select the "Set USER password" menu option.
4. Select 4 numbers between 0-9.
5. Confirm the 4 numbers by entering them again.
6. Confirm you selection with "OK."
Reset passwords
1. Select the "System settings" menu option.
2. Select the "Access control" menu option.
3. Select the "Reset passwords" menu option.
4. Confirm your selection with "Yes."
6.3.2
Log files
Create log files
1. Select the "System settings" menu option.
2. Select the "Log files" menu option.
3. Select the "Create log files" menu option.
4. Confirm your selection with "Yes."
Log frequency
1. Select the "System settings" menu option.
2. Select the "Log files" menu option.
3. Select the "Log frequency" menu option.
4. Select a setting between 1 s and 600 s.
5. Confirm your entry.
