![background image](http://html1.mh-extra.com/html/gardner-denver/savg2-75/savg2-75_installation-operating-and-service-manual_3879645020.webp)
13-21-615 v01 Page 19
The heat exchanger system is designed to operate with water inlet temperatures from 60
F to 90
F (16
C
to 32
C) and a water outlet temperature not to exceed 110
F (43
C). If water colder than 60
F is used, high
water outlet temperatures (over 110
F, 43
C) will be experienced along with shortened heat exchanger
life caused by tube fouling and corrosion. If water warmer than 90
F (32
C) is used, higher compressor oil
inlet temperatures and high water usage will result.
Most water systems will require control of impurities: filtration, softening or other treatment. See Section 5,
“Compressor Oil Cooler, Water-Cooled Heat Exchanger” for more information on the water system.
304EBD797-02
(Ref. Drawing)
Figure 2-7 SERIES PIPING
SERIES PIPING
(Figure 2-7) Water flow must be through aftercooler first for effective cooling of discharge
air and is so piped on the standard water-cooled unit.
304EBD797-02
(Ref. Drawing)
Figure 2-8 PARALLEL PIPING