![background image](http://html1.mh-extra.com/html/gardner-denver/savg2-75/savg2-75_installation-operating-and-service-manual_3879645026.webp)
13-21-615 v01 Page 25
Quick Start Guide
For your convenience, the following excerpt from the Controller Operating and Service Manual is presented
to assist in programming the basic operating parameters. However,
we strongly recommend you read
the Controller Operating and Service manual before attempting operating the compressor
package
.
The Governor controller will automatically boot to the Home Screen after applying power to the machine.
Follow the steps below to log in to the controller, verify the pressure setting and operating mode, and start
the compressor.
Logging In
Before making any changes to the settings on the controller, you must log in with an appropriate access level. The
current access level is indicated by the
User
button on the
Status Bar
in the bottom left of the screen as shown in
below. The text of the button indicates the current access level.
Figure 3-1: Login Button
Pressing this button will navigate to the Security screen as shown in
Figure 3-2: Security Screen
To log in, select the desired access level from the
User
dropdown, enter the password into the
Password
field, and
press the
Log In
button.