![background image](http://html1.mh-extra.com/html/gardner-denver/governor/governor_manual_3577470034.webp)
Page 34
13-17-625 v00
Figure 33: RJ-12 to Terminal Breakout Connector (GD PN: TEN023981)
Gardner Denver provides a kit
324AUX6028
that includes all hardware required to add a machine
to a new or existing ES+ sequencing network. The parts list for
324AUX6028
is listed in Table 5
Table 5: 324AUX6028 Sequencing Kit
Part Number
Description
Quantity
24CA3403
PLUG-MODULAR SPC TA-30-6
2
97J49
WIRE #24-6/C FLAT SPC TXW6205-WF
10 FT
TEN023981
Breakout Terminal Block, DIN Rail Mounted, 2 Amp, 120 Volt
1
24CA3404
CRIMPING-TOOL
1
5.2 Communication Configuration
Next, configure the RS485 communications under the Communications Configuration page. ES+
sequencing requires a specific baud rate for communications, which will be set automatically after
selecting the sequence mode. ES+ sequencing can operate on both 9600 and 1200 baud as long
as all devices on the network are set to the same baud rate. Navigate to the communication settings
by selecting Menu, Settings, Configuration, and then Communication, as shown in Figure 34. Select
the RS485-0 tab then change the mode to
Sequence
– ES+.
The location of the ES+
communications is on the display.
Summary of Contents for Governor
Page 42: ...Page 42 13 17 625 v00 NOTES...
Page 43: ...Page 43 13 17 625 v00 NOTES...