13-17-621 Page 26
3
.
6.2 Control Settings
The settings under the Control Menu determine how the machine operates to match the process
requirements of the customer. The default settings of the machine are acceptable for most installations.
However, if the Pressure Band displayed on the gauge on the Home screen does not match the desired
pressure range for the site, the Pressure Band must be adjusted.
To adjust the Pressure Band, navigate to Settings -> Control as shown in Figure 24. Then, press the
Adjust
button next to p1 Pressure Band.
Figure 24: Control Settings
The p1 Pressure Band Setting screen is shown in Figure 25 below. The bar graph gives a visual
indication of the pressure band settings. Press the numerical value boxes to make adjustments as
needed. Note that the minimum and maximum values that will be allowed for each box will change
dynamically based on the design pressure of the machine as well as the values of the other settings. For
example, to increase the Load pressure to 126 PSI in Figure 25, the Unload pressure and Target
pressure would first need to be increased.
Summary of Contents for Governor
Page 37: ...13 17 621 Page 37 Figure 36 Trend Graph Setup...
Page 43: ...13 17 621 Page 43...
