13-17-621 Page 27
Figure 25: Primary Pressure Band Setting
Once you are satisfied with the pressure band settings, press the
Save
button to commit the changes.
3.7 Clearing Alarms
If there are any faults present on the machine, they must first be cleared to allow the machine to be
started. If the machine has been powered on recently and Auto Restart is not enabled, a Power Loss fault
will be present.
If a fault is active on the machine, the Active Alarms screen can be accessed by pressing on the Alarm
triangle on the Message Status Bar on the Home screen, or by navigating to Alarms -> Active Alarms
through the Menu. The Active Alarms screen is shown in Figure 26.
Figure 26: Active Alarms Screen
Summary of Contents for Governor
Page 37: ...13 17 621 Page 37 Figure 36 Trend Graph Setup...
Page 43: ...13 17 621 Page 43...
