13-17-621 Page 8
The display is shown above in Figure 1 with the Home screen visible. Note that the
Start
and
Stop
buttons as shown in the image are active areas of the touchscreen rather than physical buttons.
2.1.2 IO Module
The IO module is mounted inside the compressor cabinet and connects to the display as well as all of the
digital and analog inputs and outputs on the system. These values are monitored and controlled by the
display to operate the compressor. The IO module also contains RS485 communications ports for
customer connection and sequencing.
Figure 2: IO Module
The IO module is shown in Figure 2 above. Note that depending on the type of compressor you have,
your IO module may have more or less inputs and outputs present on it, indicated by the amount and size
of connectors on the board.
Summary of Contents for Governor
Page 37: ...13 17 621 Page 37 Figure 36 Trend Graph Setup...
Page 43: ...13 17 621 Page 43...
