![background image](http://html2.mh-extra.com/html/gardner-denver/elmo-rietschle-v-vc-40/elmo-rietschle-v-vc-40_original-operating-instructions_5060677021.webp)
21
www.gd-elmorietschle.com
© Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
|
Maintenance and repair
s
2
U
D
s
1
G
f
2
f
4
f
4
h
1
f
3
g
1
h
7.2.1 Air filtering
NOTICE
Insufficient maintenance on the air filter
The power of the machine lessens and damage may
occur to the machine.
Intake air filter:
The micro filter (Fig. 4/f
2
) must be cleaned by rinsing
out or purging or replaced more or less often de-
pending on how dirty the discharged medium is.
Remove the cover (Fig. 4/G) after undoing the
screws ( Fig. 4/s
1
) and remove the suction flange
(Fig. 4/D) after undoing the screws (Fig. 4/s
2
).
Re-assemble in reverse order. After that check the
function of the valve. For this purpose fit a shut-off
device (enclosed volume min. 1 litre) on the suction
side and starts vacuum pump shortly. Afterwards
the vacuum achieved must remain constantly.
Gas ballast valve filter:
The pumps work with a gas ballast valve (Fig. 4/U).
The inbuilt filter disc Fig. 5/f
3
) and micro filter discs
Fig. 5/f
4
) must be cleaned more or less often by
purging depending on how dirty the medium flow-
ing through is. By undoing the countersunk screw
(Fig. 5/g
1
) and removing the plastic cover (Fig. 5/h
1
)
the filter parts can be removed for cleaning.
Re-assemble in reverse order.
Fig. 4 Air filtering
D
Suction flange
G
Cover
U
Gas ballast valve
f
2
Micro filter
h
Valve
s
1
Lens flange screw
s
2
Screws
Fig. 5 Gas ballast valve
h
1
Cover
f
3
Filter disc
g
1
Countersunk screw
f
4
Micro filter discs
Summary of Contents for Elmo Rietschle V-VC 40
Page 31: ......