background image

 

Make sure you keep your feet at a safe distance from the mower blade at all times! 
Do not stand near the grass ejection chute if the grass collector is not 

tted. 

 

 

The safety distance from the moving blade produced by the push handle must be 
maintained at all times. 
 

 

If you use the mower on a small incline. Mow across the slope (not in an up and 
down direction). 

 

Always be sure of your footing on slopes. 
 

 

Be particularly careful when changing direction with the mower whilst working on 
a slope. 
 

 

Do not use the lawn mower on gradients of over 15 degree. 
 

 

Ensure that you have safe footing at all times whilst working with the mower. 
 

 

Always wear strong. Anti-slip footwear and long trousers when using the mower. 
Never mow in bare feet or in open—toed sandals. 
 

 

When the mower is running ensure that no person or pet, particularly children and 
animals, is in the immediate vicinity of the lawn mower. Ensure that you keep 
everybody at least 10 meters away from the mower when it is working. 
 

 

Switch off the motor and disconnect the plug from the power supply if the mower 
strikes a foreign body. Check the mower for signs of damage and carry out all 
necessary repair work before you start the mower again. 
 

 

If the lawn mower begins to vibrate abnormally, switch it off immediately, 
disconnect the plug immediately and check it carefully. Ensure that all the nuts, 
bolts and screws are tight and that the mower is in a safe condition for use. 
 

Summary of Contents for ME1030G






















Reviews: