OPERATING INSTRUCTIONS AND TIPS
SETTING THE CUTTING HEIGHTS
IMPORTANT!
Set the cutting height only when the motor is switched off and the power cable
has been disconnected.
The cutting height is adjusted as shown in Figs. 4a and 4b.To do this, turn the hub cap clockwise to release
the bolt (Fig. 4a) and remove the hub cap with the bolt and wheel. The wheels can now be
fi
tted in
position 1, 2 or 3 to suit the required cutting height. Fit all four wheels at the same height so that the
cutting blade rotates parallel to the lawn.
Position
Cutting height
1
20 mm
2
40 mm
3
60 mm
Before you begin to mow, check to ensure that the blade is not blunt and that none of the fasteners are
damaged. To prevent any imbalance, replace blunt and/or damaged blades. To carry out this check,
fi
rst
switch off the motor and pull out the power plug.
