1. Fix the bottom tube to the base using the 4pce M6 x
30mm screws.
2. Screw 3 x M5, 6mm screws into end of the middle
tube and attach the cord support clamp to the middle
tube before fixing to the base pole.
3. Screw 3 x M5 6mm screws into end of the upper
tube and attach the cord support clamp to the upper
tube before fixing to the middle pole.
4. Attach the cord support clamp to the top part of the
upper tube before, Then fix the heater head to the
top tube using the plastic screw in the heater head.
Assembly Instructions
Carefully remove all the product elements from the packaging.
IMPORTANT: This product comes unassembled out-of-the-box, however the supplied bolts are already screwed in place.
Please remove these bolts before assembling the product. You will need a Philips screwdriver (not included).
Once the patio heater has been assembled, place it in
a suitable location in your garden and connect it to your
mains power supply.
