Keep clear of dirt and debris. Ensure water is not
accidentally sprayed into battery compartment.
Timer cannot be reassembled if taken apart.
Disassembling will void all warranties.
Performance Specifications
Water pressure: Maximum up to 600 kPa.
If operating in a higher water pressure area,
use a pressure reducer.
Temperature: Max 60º C
Batteries: 2 x AA Alkaline
Use with cold water only
Trouble shooting
• If batteries are running low the valve will close
automatically.
• Ensure that the Run Time dial is not set to
Manual Off.
• Check that the Frequency selected is longer than
the Run Time. Eg do not set a 120 minute run time
and a 2 hour frequency.
• Make sure the tap is turned on.
To Program:
Once attached to tap simply select your watering
frequency and your run time.
The dials can be turned both clockwise and
anti-clockwise without damaging the mechanism.
To set watering twice daily – Select 12
To set watering daily – Select 24
To set watering every second day - Select 48
To set watering every week – Select week
So for example if you set it every 12 hours for 20 minutes
and you set it at 8am, it will come on first at 8pm, then
8am etc every day for 20 minutes each time.
Maintenance:
Make sure you only use new Alkaline batteries.
This gives approximately 12 months battery life in
your timer.
Summary of Contents for Easy Dial
Page 1: ......
