UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
9
earthed or grounded surfaces i.e. metal gates, posts or other
metal objects in the work area.
• Never pull the appliance by its power cord. Wheel it or carry
it with two hands.
• Do not allow the power cord to lay on or across sharp objects
that might pierce the outer insulation. Carry out a visual
inspection of the power cord before use and if it is damaged,
have it replaced by a specialist service centre. Do not use the
appliance if the cord is damaged.
• Keep the power cord away from heat, frost, oil, solvents or
any sharp objects or edges.
• Do not use this appliance if you are on strong medication,
unwell or have been drinking alcohol.
• Before starting the machine, look into the feeding chamber to
make certain that it is empty.
• Keep your face and body away from the feed intake.
• Do not allow hands or any other part of the body or clothing
inside the feeding chamber, discharge chute, or near any
moving part.
• Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the base of the
machine when feeding material into it.
• Always stand clear of the discharge zone when operating this
machine.
• When feeding material into the machine be extremely careful
that pieces of metal, rocks, bottles, cans or other foreign
objects are not included in the waste
• If the cutting mechanism strikes any foreign objects or if the
machine should start making any unusual noise or vibration,
shut off the power supply and allow the machine to stop
(Unplug the machine):
• inspect for damage
• check for and tighten any loose parts
• have any damaged parts replaced or repaired with parts
having equivalent specifications
• Do not allow processed material to build up in the discharge
tube; this may prevent proper discharge and can result in
kickback of material through the feed intake opening.
• If the machine becomes clogged, shutoff the power supply
(unplug the unit from supply) before clearing debris. Keep the
power supply clear of debris and other accumulations to
