UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
17
fitting the transportation wheels
Fig. 1-4
You may need assistance when lifting the machine out
of the box and assembling.
1. Turn the leg bracket upside down and place it on the floor.
2. Position the axle tube between the two legs of frame.
3. Position the wheels on the axles.
4. Position the washers, wheel bushes, big washer and screw on each
wheel. Tighten both the wheel screws using a suitable spanner.
note.
The wheels must be fitted correctly to allow the nuts to
tighten on each end of the axle.
push the wheel covers firmly onto the wheels.
Take care when tilting the unit onto its wheels as the
unit has an uneven weight distribution when tilted and
during wheeled transportation.
Fitting the units
Fig. 5-6
1. Postion the upper unit on the frame.
2. Use four screws and washers, and then tighten it with a
screwdriver.
Fitting the Collection box
Fig. 7-8
1. Push the collection box in the space under the upper unit.
2. Push the locking knob down when you assemble the collection
box until the box is positioned correctly. Push the locking knob
up to secure the collection box. The locking lever is equipped
with a safety switch. The garden shredder can only be activated
when the locking lever is in the upwards position.
Warning! Never attempt to put your hand inside the
shredder inlet cavity. If you want to push material into
cutting chamber use a suitable strong stick!
