Gardenline
09
24
Gardenline
Important:
Blades should only be removed and reinstalled by an authorized Servicing
address, otherwise premature wear or internal damage may occur.
Trouble shooting
Problem
Engine cranks,
start hard or does
not start.
Engine runs, but
dies or does not
accelerate
properly.
Engine does not
crank
Check
Fuel at carburetor.
Fuel at cylinder.
Spark at end of
plug wire.
Spark at plug.
Air filter.
Fuel filter.
Fuel vent.
Spark plug.
Carburetor.
Cooling system.
N/A
Status
No fuel at
carburetor.
No fuel at cylinder.
Muffler wet with
fuel.
No spark.
No spark.
Air filter dirty.
Fuel filter dirty
Fuel vent plugged.
Plug dirty or worn.
Improper
adjustment.
Cooling system
dirty or plugged.
N/A
Cause
Fuel strainer
clogged.
Fuel line clogged.
Carburetor.
Carburetor.
Fuel mixture too
rich.
Stop switch off.
Electrical problem.
Interlock switch.
Spark gap
incorrect.
Covered with
carbon.
Fouled with fuel.
Plug defective.
Normal wear.
Contaminants or
residues in fuel.
Contaminants or
residues in fuel.
Normal wear.
Vibration
Extended
operation in dusty
or dirty locations.
Internal engine
problem.
Remedy
Clean or replace.
Clean or replace.
See address on
the warranty card.
See address on
the warranty card.
Open choke.
Clean or replace
air filter.
Adjust carburetor.
See address on
the warranty card.
Turn switch to On.
See address on
the warranty card.
See address on
the warranty card.
Adjust to 0.65 mm
(0”.026).
Clean or replace.
Clean or replace.
Replace plug.
Clean or replace.
Replace.
Clean or replace.
Clean and adjust
or replace.
Adjust.
Clean.
See address on
the warranty card.
GB
PETROL HEDGE TRIMMER GPHS-26CC
The numbers in the following text correspond with the pictures at page 2 - 9.
Read and understand this manual before operation. Keep it in a safe place for
future reference. It contains specifications and information for operation, starting,
stopping, maintenance, storage, and assembly specific to this product.
Read and understand the safety instructions before operation. Keep it in a safe
place for future reference. It explains possible hazards involved with the use of this
product and what measures you should take to make use of this product safer.
Introduction
This Gardenline product was designed and manufactured to provide long life and on-the-job
dependability. Read and understand this manual. You will find it easy to use and full of helpful
operating tips and safety messages.
Specifications, descriptions and illustrative material in this literature are as accurate as known
at the time of publication, but are subject to change without notice. Illustrations may include
optional equipment and accessories, and may not include all standard equipment.
Contents
1.
Machine data
2.
Safety
3.
Assembly
4.
Operation
5.
Maintenance
1. MACHINE DATA
Technical specifications
Type of engine
Air cooled, 2-stroke, single cylinder,
gasoline engine
Engine power
0.75kW
Idle speed
2800- 3200/min
Displacement 25
cc
Bore
34.0 mm (1.34”)
Stroke
28.0 mm (1.10”)
Exhaust system
Muffler
Carburetor Ruixing
Ignition system
Flywheel magneto, capacitor discharge
ignition
Spark plug
BPMR7A(Gap 0.65 mm (0”.026)
Fuel
Mixed fuel, gasoline and oil, 25:1
Gasoline
89 Octane unleaded *
Oil
Universal 2-stroke engine oil
GB
