17
Instructions
5
AFTER SALES SUPPORT
GB
IRE
0151 649 1500
1890 946244
GLSA 1231, 61307, 08/2014
www.einhell.co.uk
Tips for proper working
It is recommended that you overlap scarifying paths a little.
Try to scarify in straight lines for a nice, clean look. In so doing, the aeration
swathes should always overlap each other by a few centimetres in order to
avoid bare strips.
As soon as grass clippings start to trail the scarifier, it is time to empty the
grass basket.
IMPORTANT!
Before taking off the grass basket, switch off the motor and wait until
the roller has come to a stop.
To remove the grass basket, lift up the ejector flap with one hand, while
unhooking the basket with the other.
How frequently you should scarify your lawn is determined primarily by the
speed at which the grass grows and the hardness of the soil.
Keep the underside of the equipment clean and remove soil and grass build-up.
Deposits make it more difficult to start the rake and decrease the quality of
the scarifying.
Always scarify along inclines (not up and down). Switch off the motor before
doing any checks on the roller.
IMPORTANT!
The roller rotates for a few seconds after the motor is switched off.
Never attempt to stop the roller. In the event that the rotating roller strikes
an object, immediately switch off the equipment and wait for the roller to
come to a complete stop. Then inspect the condition of the roller. Replace
any parts that are damaged (see page 18).
Lay the power cable on the ground in loops in front of the power outlet.
Scarify away from the power outlet and cable, making sure that the power
cable always trails in the already scarified grass so that the equipment does
not travel over the cable.