Form No. 3406-121 Rev A
Z Master
®
8000 Series Riding Mower
with 42in and 48in Direct-Collect Cutting Unit
Model No. 74310—Serial No. 316000001 and Up
Model No. 74311TE—Serial No. 316000001 and Up
Model No. 74312—Serial No. 316000001 and Up
Model No. 74313—Serial No. 316000001 and Up
Setup Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
The engine exhaust from this product contains chemicals known to the State of California
to cause cancer, birth defects, or other reproductive harm.
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Open the crate.
Rear caster wheel
1
Bolt (1/2 x 13 inches)
1
2
Locknut (1/2 inch)
1
Remove the machine from the crate.
Long guard
1
Guard
1
Bolt (1/4 x 1 inch)
4
Flat washer (1/4 inch)
4
3
Retainer nut (1/4 inch)
4
Install the PTO shaft guards
(International machines only).
4
No parts required
–
Check the tire pressure.
5
No parts required
–
Check the engine-oil level.
6
No parts required
–
Check the torque of the wheel lug nuts.
7
Wing nut (1/4 inch)
2
Install the battery.
8
No parts required
–
Charge the battery.
9
No parts required
–
Check the hydraulic Fluid.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
*3406-121* A
