Gardenline GLPT 2538, User Manual

Page: 18 / 29

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
35
25cc Petrol Grass Trimmer – GLPT 2538 Use
AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
34
25cc Petrol Grass Trimmer – GLPT 2538 Use
If the engine does not start up even after several attempts,
read the section 'Malfunction and remedy (FAQ)' on page 39.
Always pull out the starter cable in a straight line. If it is pulled
out at an angle, friction will occur on the eyelet.
As a result of this friction, the starter line will become frayed
and will wear away faster. Always hold the starter cable when
the starter line retracts.
Operation (Continued)
Starting the engine when warm
(The equipment has been idle for less than 15-20min)
1 . Set the equipment down on a hard, level surface.
2. Switch the On/Off switch to 'I' (Fig. 1/Item 9).
3. Hold the equipment firmly and pull out the starter cable until you feel it start to resist.
Then tug sharply on the starter cable. The equipment should start after 1-2 tugs. If the
equipment does not start after 6 tugs, repeat steps 1-6 of the procedure for starting the
engine from cold (See page 33).
Switching off the engine
Emergency Stop procedure:
If it becomes necessary to stop the equipment immediately, set the On/Off switch (9)
to 'Stop' or '0'.
Normal procedure:
Let go of the throttle lever (11) and wait until the engine has changed to idling speed.
Then set the On/Off switch (9) to 'Stop' or '0'.
Practice all the work steps with the engine switched off
before you start to use the equipment.
Fig. 1b
5
7
4
Fig. 1c
9 12
11